I applied through university. I interviewed at Texas Instruments (Bengaluru) in Sept 2024
Interview
Interview process was good. Interview timing 1hr. Campus placement.
They ask only Basic Digital Design Questions. But Indepth knowledge is required for that. Refer books Morris Mano which can help with basics.
Interview questions [1]
Question 1
Design Counter 3-bit counter which counts odd numbers.
Static 0 and static 1 hazard.
Setup and Hold Violation Questions.
I applied through university. The process took 1 week. I interviewed at Texas Instruments (Bengaluru) in July 2025
Interview
This is a part of On campus recruitment
First they Conducted ppt, then online test where we can select 2 domains
Each domain consists of 20 questions, 45 min each and an extra aptitude section
Interview questions [1]
Question 1
Started off with my intro
Then asked about my projects, later moved on to technical questions that basically covered digital signal processing, frequency divider circuits, FFT, applications of 2's complement and gray code representation
Two rounds, one technical and one HR round. Technical round lasted for about one hour which consisted of questions related to fpga working, cache coherence, digital logic design, verilog and vhdl, STA and questions related to projects mentioned in my resume.
Interview questions [1]
Question 1
Started with basic digital electronics questions like logic design(also included equivalent verilog code), counters then moved to STA and physical design. Later on questions on cache memory were asked. I had done a project on asynchronous fifo so I had to explain that. Finally few basic questions related to fpga.
I applied through university. I interviewed at Texas Instruments (Bengaluru)
Interview
First exam clear that than interview process, it is moderate to hand level
You have to prepare very well then they will hire otherwise do not apply.. . . . .