I applied through a recruiter. The process took 2 weeks. I interviewed at NVIDIA (Santa Clara, CA) in Apr 2018
Interview
Good Experience . Covered basics starting from digital design to c++.
Random comp arch questions as well. More emphasis was made on clock tree synthesis, clock skew , slack, clk jitter etc
3) Flip flop A -> Flip flop B -> Flip flop C - output of Flip flop is C is connected to Flip flop A.
Combinational delay between A and B is 3ns, b/w B and C is 4ns, b/w C and A is 5ns.
Case a) Find max operating freq? [setup = 1ns, hold = 1ns,clock to q =0]
Case b) Now make the flip flop B , neg edge triggered . Find max operating freq?
The interviewer was very rude, asked questions but didn’t show patience to explain when I asked for details on the questions asked. It was very question and answer session rather than a discussion or interaction.
Interview questions [1]
Question 1
Q.Block a has 1000 wires that are connected to block b. Connections are 1:1. What vectors can you use to make sure the 1:1 connections are aligned.
I applied through university. I interviewed at NVIDIA (Bengaluru) in Oct 2021
Interview
After getting selected in the online test, I was asked to give an interview through video call. The interview process was comfortable. The interviewer first asked to introduce myself and then the technical questions were asked.
Interview questions [1]
Question 1
The questions were majorly from basic digital electronics.
Questions from bit manipulation and C programming were also asked.
I applied through university. I interviewed at NVIDIA
Interview
They asked questions about basic VLSI formal verification, projects on my resume, and NoC questions. Since I did project in NoC, they asked a bit more about it. Most question were not too hard to answer.
Interview questions [1]
Question 1
Building a 3-input nand with 2-input nand, and some verilog questions, SV questions quesitons
